Crushed Stone Quantity Calculator
| Quantity (tons) | Coverage Area (square feet) |
|---|---|
| 1 | 100 – 120 |
| 2 | 200 – 240 |
| 3 | 300 – 360 |
| 4 | 400 – 480 |
| 5 | 500 – 600 |
| 6 | 600 – 720 |
| 7 | 700 – 840 |
| 8 | 800 – 960 |
| 9 | 900 – 1080 |
| 10 | 1000 – 1200 |
FAQs
How do you calculate how much crushed stone you need?
To calculate the quantity of crushed stone needed, you first need to determine the volume of the area to be filled. Measure the length, width, and depth of the area in meters, then multiply these dimensions together to find the volume in cubic meters. The result will give you an estimate of the amount of crushed stone needed for the area.
How much area does a ton of crushed stone cover?
The coverage area of a ton of crushed stone can vary depending on the depth of the layer and the size of the stones. As a rough estimate, a ton of crushed stone may cover approximately 100 to 120 square feet at a depth of 2 inches.
How much does crusher run weight per m3?
Crusher run typically weighs approximately 1.6 metric tons per cubic meter.
How do you calculate gravel quantities?
To calculate gravel quantities, measure the length, width, and depth of the area to be filled in meters. Multiply these dimensions together to find the volume in cubic meters. Then, multiply the volume by the density of gravel (usually around 1.5 to 1.7 metric tons per cubic meter) to estimate the quantity of gravel needed.
How much does 1 ton of crush and run cover?
The coverage area of 1 ton of crush and run can vary depending on factors such as the depth of the layer and the size of the stones. As a rough estimate, 1 ton of crush and run may cover approximately 100 to 120 square feet at a depth of 2 inches.
Is 2 inches of gravel enough for a driveway?
A depth of 2 inches of gravel is generally considered sufficient for light to moderate use driveways. However, for heavier traffic or areas prone to sinking or erosion, a thicker layer may be recommended.
How many wheelbarrows in a ton of crushed stone?
The number of wheelbarrows in a ton of crushed stone can vary depending on the size and capacity of the wheelbarrow, as well as the density of the crushed stone. As a rough estimate, it may take around 10 to 12 wheelbarrows to transport 1 ton of crushed stone.
What area will a 25kg bag of gravel cover?
The coverage area of a 25kg bag of gravel can vary depending on factors such as the depth of the layer and the size of the stones. As a rough estimate, a 25kg bag of gravel may cover approximately 0.5 to 0.7 square meters at a depth of 2 inches.
How much does 1 ton of crushed stone weight?
One ton of crushed stone typically weighs approximately 1.6 metric tons.
How heavy is 1m3 of crushed rock?
One cubic meter of crushed rock typically weighs around 1.5 to 1.7 metric tons, depending on the density of the rock.
How do you calculate how much crush and run do I need?
To calculate how much crush and run you need, measure the length, width, and depth of the area to be filled in meters. Multiply these dimensions together to find the volume in cubic meters, then multiply the volume by the density of crush and run (typically around 1.6 metric tons per cubic meter) to estimate the quantity needed.
How thick should crusher run driveway be?
A crusher run driveway typically requires a thickness of 2 to 4 inches for proper coverage and stability.
How much will 1 ton of gravel cover?
The coverage area of 1 ton of gravel can vary depending on factors such as the depth of the layer and the size of the stones. As a rough estimate, 1 ton of gravel may cover approximately 100 to 120 square feet at a depth of 2 inches.
How many kg of gravel do I need?
The amount of gravel needed can vary depending on factors such as the size of the area to be covered and the desired depth of the layer. To calculate the quantity of gravel needed, measure the length, width, and depth of the area in meters, then multiply these dimensions together to find the volume in cubic meters. Multiply the volume by the density of gravel (usually around 1.5 to 1.7 metric tons per cubic meter) to estimate the quantity of gravel needed in kilograms.
What is the formula for stone quantity?
The formula for calculating stone quantity is:
Stone Quantity (in cubic meters) = Length (m) × Width (m) × Depth (m)
Is crush and run cheaper than gravel?
The cost of crush and run compared to gravel can vary depending on factors such as location, supplier, and quality. In some cases, crush and run may be cheaper than gravel, while in others, gravel may be more cost-effective.
What size stone is crush and run?
Crush and run typically consists of crushed stone with particles ranging from 0.75 inches to fine dust.
Can you put crush and run on top of gravel?
Yes, crush and run can be laid on top of gravel as long as the gravel is well-compacted and stable. However, it’s important to ensure proper drainage to prevent water from pooling.
Is 20mm gravel OK for driveway?
A 20mm gravel can be suitable for driveways, especially if it’s well-compacted and laid to the appropriate thickness. However, for heavy traffic or areas prone to sinking, a thicker layer of gravel may be recommended.
What is the best size crushed stone for a driveway?
The best size of crushed stone for a driveway depends on factors such as the desired appearance, drainage requirements, and intended use. Common sizes include 3/4 inch, 1/2 inch, and fines.
What is the cheapest gravel for driveways?
The cheapest gravel for driveways can vary depending on factors such as location and availability. Generally, locally sourced gravel or crushed stone may be the most cost-effective option.
How many wheelbarrows make 1 tonne?
The number of wheelbarrows needed to transport 1 tonne of material can vary depending on factors such as the size and capacity of the wheelbarrow, as well as the density of the material. As a rough estimate, it may take around 10 to 12 wheelbarrows to transport 1 tonne of material.
How many wheelbarrows are in 20 tons?
The number of wheelbarrows needed to transport 20 tons of material can vary depending on factors such as the size and capacity of the wheelbarrow, as well as the density of the material. As a rough estimate, it may take around 200 to 240 wheelbarrows to transport 20 tons of material.
How many tonnes of gravel are in a lorry?
The capacity of a lorry can vary, but a typical large lorry may be able to carry around 20 to 25 tonnes of gravel.
How many 25kg bags in 1 cubic metre?
The number of 25kg bags needed to fill 1 cubic meter can vary depending on the density of the material being used. As a rough estimate, it may take around 40 to 50 bags to fill 1 cubic meter.
How much will a 20KG bag of gravel cover?
The coverage area of a 20kg bag of gravel can vary depending on factors such as the depth of the layer and the size of the stones. As a rough estimate, a 20kg bag of gravel may cover approximately 0.4 to 0.6 square meters at a depth of 2 inches.
How far will 4 tons of gravel cover?
The coverage area of 4 tons of gravel can vary depending on factors such as the depth of the layer and the size of the stones. As a rough estimate, 4 tons of gravel may cover approximately 400 to 480 square feet at a depth of 2 inches.